Cia. PakiPaya


	ES CT FR EN

Show

Technical Rider

Show

Duration: 20 minutes version / 6 minutes version (cabaret).
Audience: a show suitable for the general public.
Possible Stage: Big top, marquee, Hall, at street …

Frame (20 minutes version)

Indoor: At less 7 meters height
Flat surface used on the floor 12 x 10 meters (crash mat, stage space and for the four frame anchor points.
The frame anchor points must be resistant 500 Kilograms (minimum) each one.
Two ceiling anchor points. They must be resistant 200 kilograms each one (to assemble and disassemble the frame).
Outdoor: 7 meters height uncovered (minimum)
Flat surface used on the floor 12 x 10 meters (minimum) without any obstacles to put up and down the frame (it must be accessible to a vehicle with a trailer to unload materials).
Anchor: 7 picks (property of company) to drive 1 meter deep.

*Anchor possible alternative (organization responsibility): 5 block of 1000 Kilograms each one (cement, sand, water…) and pallets to put under the blocks to prevent that those ones slip.

Aerial Cradle (cabaret version, 8 minutes)

At less 7m height.
Flat surface used on the floor 12 x 10m (reception mats,
surface used on the stage and 4 anchor points resistant 800Kg (min.) each one.
Two anchor points on the ceiling, resistant 500kg (mín) each one (to hang the aerial cradle on)

Assembly

Four hours (minimum) are required in advance of the show (regulations + warming-up).
In both cases (outdoor and indoor) technical assistance is needed at the performance place (organization responsibility) to deploy the frame.

Lights

10 pars 64, front and back

IMPORTANT:
DO NOT put lights in the path of the crash mat.
LIGTHS must be regulate and tested before show.

THE COMPANY IS NOT AUTONOMOUS AT LIGTHS MATERIALS.